Name: Get your wholesale 194.85 4 Rockville White 4 Tower Speakers+Hifonics Amp+Bluetooth For ATV UTV Cart Hot on Sale
SKU: E893F49B810CCD24
Price: 194.85 USD
Availability: InStock

What s In the Box:

2 Speakers

Installation Hardware: (8 Stainless Steel Screws + 8 Stainless Steel Speed Clips)

Mounting Template

Owner s Manual

Warranty Card

Features of MS40W:

Pair Rockville MS40W 4 200 Watt Waterproof Marine Boat Speakers

Peak Power: 200 Watts per pair 100 Watts each

RMS Power: 50 Watts per pair 25 Watts each

Color: White

Injection Molded Polypropylene Cone

Aluminum voice coil with ASV winding

Cloth surrounds

Impedance: 4 Ohm

Frequency Response: 122Hz – 20 Khz

Sensitivity: 85dB @1w 1m

High quality magnet: 3.5 Oz Y30 Ferrite magnet

1” inch ASV voice coil

IP56 waterproof rating

Fully Marinized Against Salt & Fresh Water Conditions

Completely Waterproof and rustproof at level IP56

Anti-UV molded ABS plastic basket & grill

Pre-installed mounting screws included

Perfect for marine, outdoor, and car use

1” inch Tweeter: (Mylar Diaphragm with NdFeB magnet)

Injection Molded Polypropylene Dust Cap

SPL: 85dB ± 2dB (at 1M 1W)

Resonant Frequency (F0) 122Hz + or – 20% at 1V

3MM plate and 3 MM T-yoke

Total Diameter: 5.12”

Cutout Diameter in Inches for Mounting: 3.66”

Total Height: 2.36”

Mounting Depth in inches:1.57’’

Shipping weight: 1.76 Lbs

Shipping Dimensions:6” x 6” x 5.7”

T S Parameters:

Magnet details: F60*F24*8 Y30

Fs:154.7 Hz

Re:3.2 ohms

Qes:2.57

Qts:1.611

Qms:4.315

Vas:0.847L

Cms:210.222UM N

Bl:2.468T

MMS:5.029g

XMAX:1.5 mm

SD:54 cm2

Description of TPS-A350.4:

Hifonics THOR compact Four Channel, 350 watt Powersports amplifier with on-board equalization and simple installation with quick release connectors.

Features:

Hifonics TPS-A350.4 350w 4-Channel Marine Amplifier For Polaris RZR ATV UTV Cart

Marine Grade Protection: YES – Amplifiers are ABYC & ASTM certified which defines that marine amplifiers must use conformal coated PC boards to resist corrosion from salt spray & moisture.

Pre-Amp Circuitry: Low Noise Pre-Amplifier Stage – Special preamplifier reduces incoming noise from source units dramatically improving sound quality

Inputs: 2 Pair, RCA Nickel-Plated – High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant

Operation Mode: Four channel operation – Flexible installation allows this amplifier to run in four channel or bridged mono mode.

Crossover Signal Shaping: Switched FULL LPF HPF – Complete control of amplifier signal, essential when using two or more amplifiers

Class Topology: Full Range Class D – Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink.

Output Devices Technology: PWM MOSFET Power Supply – Stable power through the PC board with minimal heat generation

Heat Sink: Aluminum – Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration

Power Supply: Simpatico Coil Design – The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices

Output Connections: Quick Dissconect Wires, RCA Connections – Quickly remove amplifer when you are putting machine up for the winter of as a security precaution

Connections Type: Gold-plated connections – Gold-plated power, ground, speaker and RCA corrosion resistant connections

Diagnostics: Three-stage protection circuits – Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel

Marinized Waterproof: YES – Water resistant for durability in any environment

Specifications:

Class: Full Range Class D

Variable Voltage: 0.2V~9V

Signal to Noise Ratio: >90dB

Frequency Response: 20Hz-20kHz

Crossover Frequency Range CH1 & CH2: Switched HP Full

Crossover Frequency Range CH3 & CH4: Switched HP Full

Bass Boost: 0-12dB@45Hz

Power @ 2-Ohms: 4 x 80W

Power @ 4-Ohms: 4 x 40W

Total Channels: 4

Audio Inputs: RCA

Power Terminal 12v GND: Molex 10 ga

Speaker Terminal Wire Gauge: Molex Plug Connector

Fusing: 1 x 30 Amps

Certifications: Marine & Powersports

Dimensions: 3.70 X 5.51 X 1.77 inches (9.4 X 14.0 X 4.5 cm)

Weight: 2.16 lbs (0.98 kg)

Description of TPS-BT1:

For installations where a full size radio source until will not fit, Hifonics has designed the ridiculously small TPS-BT1 Bluetooth, pre-amp controller. That model comes from THOR Power Sports Bluetooth 1. It might be your favorite controller you have ever used. The amount of control and connectivity you will have at your fingertips is shocking.

All the music, from your Bluetooth enabled device, directly into your system via this small controller. The TPS-BT1 is fully IPX67 protected against the elements so it is perfect for installation right in the dash of your Side-X-Side or off road application.

For custom car builders, looking to keep an original clean look, This Bluetooth controller is a great option to changing out the original dash radio in a classic.

Features:

Hifonics TPS-BT1 Bluetooth Marine Pre-Amp Controller 4 Polaris RZR ATV UTV Cart

Pre-amp controller

Volume and track selection are controlled by the multi-functional joystick

2 volts output

Waterproof Bluetooth controller designed to fit into a small hole

iPhone, Android & Bluetooth Device Ready

Video of MAC40:

Subtotal	$0.00
Total	$0.00

prosaleu

4 Rockville White 4 Tower Speakers+Hifonics Amp+Bluetooth For ATV UTV Cart Hot on Sale

Description

Additional Information

(4) Rockville MS40B Chrome 4 Tower Speakers+MTX Amp+Bluetooth For ATV UTV Cart Online Sale

(2) Kicker 6×9 180 Watt Tower Roll Bar Speakers For Polairs ATV UTV RZR Cart For Sale

4 Polk Audio 5.25 Tower Speakers+Alpine Amplifier+Bluetooth Control RZR ATV UTV Supply

2) Kicker 6×9 Tower Speakers+Amplifier+Bluetooth Controller Polairs RZR ATV UTV Online now

Rockville Speakers+MTX Amp+Bluetooth Controller for 2014-17 RZR 1000 900S Turbo on Sale