482I Applications:

Pro and semi-pro sound reinforcement

Multitrack studios

Mobile DJ systems

Cassette copies

Nightclub sound systems

Instrument racks for guitar, bass and keyboards

Features:

2 channels of process for stereo or separate mono mixes

5 segment LED output meters

+18dBu headroom

RCA and1 4 inputs and outputs

Hardwire bypass

Bypass switch for comparison of processed to unprocessed signal

Specifications:

Frequency Response,

Process Mode: Program controlled

Bypass Mode: 10Hz to 50kHz, + – 0.5dBu, 10dBu input

Signal to Noise Ratio: 112dB Process IN

THD, Process mode: less than 0.025% at 20-20kHz

Bypass mode: less than 0.002% at 20-20kHz

Maximum Output: +18dBu (may vary due to control settings)

Input Impedance: 47K Ohms, unbalanced 1 4 phone jack or RCA jack.

Output Impedance: 1K Ohms, unbalanced 1 4 phone jack or RCA jack.

Sensitivity: -45dBu for maximum process

Maximum Process: +12dBu boost at 5kHz, -10dBu input

Lo Contour: +12dBu adjustment at 50Hz, -10dBu input

Description Of M-8X2 + 16 SCREWS:

Free Item Offer
We are giving away 16 rack screws so you can install this and all your other rack equipment without running around and looking for screws. These are top of the line rack screws, and they are standard sized. You do not need 16 screws to install this item, however we want you to be able to install your other rack equipment as well as the Furman conditioner!

A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-8×2 in to the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load. The M-8×2 is designed for applications where lights are not required.

Features:

Noise Filtration
AC noise filtering to reduce radio frequency and electromagnetic interference (RFI EMI)

Surge Protection
Spike & surge protection ensures equipment stays safe and your power stays clean

9 Total Outlets
8 rear panel outlets and 1 front panel outlet

15 Amp Rating
15 amp rating, with circuit breaker

Protection OK Indicator
Front panel indicator LED lets you know that your equipment is being protected

Wall Wart Spacing Indicator
Rear outlets have been spaced to accommodate even the bulkiest of wall warts and adapters

Applications:

Instrument Rigs
You ve got a rack for your effects, preamps, tuner…You re going to plug that into the wall? One big spike and your rig is up in smoke. Furman s standard level surge spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman s standard level RFI EMI filtration, you ll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.

Recording
Can t track down where that noise is coming from? Your mix sounding flat? With Furman s standard level RFI EMI filtration you ll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman s standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 15A capacity and nine total outlets, it s enough to power your whole home studio.

DJ Equipment
Bars, clubs and other event venues have some of the worst power out there – from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman s standard level protection and filtration keeps the bad stuff out.

Pro Audio
When you re out there gigging, you never know what kind of power you re going to get. The wear and tear on mobile rigs eventually takes it toll – that s why it s smart to plug into Furman s standard level protection and RFI EMI filtration. It keeps your equipment safe and sounding clean. Whether you re setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.

Surge protection and why it is important:
This is the most important component you will have in your rack. The reason is because if you do not have a good surge protector that is reliable, all your equipment can easily blow out and stop working. A simple surge in voltage coming from the AC outlet can cause this to happen. Get the Furman M-8X2 and keep your expensive equipment protected!

Specifications:

Maximum Output Current:
15 amps

Line Cord:
6 ft., captive, 14 AWG, with 3-conductor Edison plug

Operating Voltage:
120VAC 60Hz

Spike Protection Mode:
Line to neutral

Energy Dissipation:
170 joules

Peak Impulse Current:
12,000 amps

Maximum Continuous Opterating Voltage:
130 VAC RMS

Let Through Voltage (@ 125 amps, 8 20uS waveform)
400 volts

Noise Attenuation:
Transverse mode: Greater than 23dB, 200Khz to 10 Mhz

Dimensions:
1.75” H x 19” W x 3.75” D

Weight:
4.9 lbs.

Safety Agency Listing:
cTUVus

Warranty:
Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship.

For over 30 years Furman has been the, hands-down leader, and most trusted brand name for AC Conditioning, AC Regulation, balanced Isolation transformers, Power Sequencing, and Power Distribution for audio, video, and broadcast professionals. Furman is used by the best studios, DJ s, clubs, professional musicians, contractors, and audio engineers across the world. They choose Furman because of reliability, quality, engineering expertise, and because Furman knows the specific needs of professionals who can t afford to have downtime or equipment failure.
We are giving away 16 rack screws so you can install this and all your other rack equipment without running around and looking for screws. These are top of the line rack screws, and they are standard sized. You do not need 16 screws to install this item, however we want you to be able to install your other rack equipment as well as the Furman conditioner!

#1 Authorized Internet Retailer!
We have the biggest selection of Furman products! Click here to find the Furman product you are looking for. Do not see the item you are looking for ? E-mail us the model(s) you are looking for and we will give you a price quote.

Title
Default Title

Subtotal	$0.00
Total	$0.00

(2) Furman M-8X2 15A 9 Outlet Rack AC Power Conditioners + Screws Sale

prosaleu

Bbe 482I Sonic Maximizer Signal Sound Processor+Furman M-8X2 Power Conditioner Fashion

Description

Additional Information

Bbe 482I Sonic Maximizer Signal Sound Processor+Furman M-8X2 Power Conditioner Fashion

Description

Additional Information

Related products

(2) Furman M-8X2 15A 9 Outlet Rack AC Power Conditioners + Screws Sale

Shopping Cart