Description:
Each generation of VLZ mixers benefits from a reinvestment in performance, all without raising prices. By continuing to ignore the “race to the bottom,” VLZ4 benefits from generations of performance improvements like transparent EQ, class-leading negative summing bus architecture and custom-designed op-amps to ensure signal integrity from every input to every output. The result is a mixer that is at the peak of performance and is the obvious go-to compact analog mixer for engineers who demand professional results.
ONYX PREAMPS
The performance of Mackie’s Onyx mic preamps is more than proven. Just check all the amazing reviews and customer testimonials. Their boutique quality sound and unmatched performance rival any high-priced, boutique preamp on the market. Adding these flagship preamps to our VLZ4 Series compact mixers underlines our commitment to continually improving the performance of the VLZ line with each generation.
HIGH HEADROOM LOW NOISE
The VLZ4 design goal was simple: every VLZ4 mixer must have the highest headroom and lowest noise possible. Strict attention to component quality and tolerances has led to innovations like our custom M80 op-amps and class-leading negative summing bus architecture that add yet another level of assurance that a Mackie VLZ4 mixer is the right choice for your professional audio application.
BUILT LIKE A TANK
Mackie VLZ mixers are truly “Built-Like-A-Tank.” From beer spills to drops from moving vehicles, the testimonials are as endless as the applications Mackie mixers serve. The VLZ4 series is certainly no exception. With a nearly indestructible steel wrap-around chassis and features like grime-resistant rotary sealed pots, you can be sure that buying a Mackie VLZ4 mixer is a solid investment.
VLZ4’s new black powder coat finish, cockpit-inspired controls and high-contrast knobs not only optimize your mixer’s usability in low-light scenarios, it also means your mixer looks as good as it performs.
COMPREHENSIVE AND PROVEN
Mackie’s VLZ4 line is extremely comprehensive, offering mixers of every channel count, every price point, for every application. From the ultra-compact 402VLZ4 for desktop applications to the tour-friendly 3204VLZ4, you can be sure there is a VLZ4 mixer with the right feature set for your needs.
Features:
- New Mackie 1604VLZ4 16-channel Compact Mixer
-
- 16-channel mixer featuring Mackie signature high-headroom low-noise design
-
- 16 boutique-quality Onyx mic preamps
- Ultra-wide 60dB gain range
-
- 128.5 dB dynamic range
-
- +22 dBu line input handling
-
- Extended frequency response
-
- Distortion under 0.0007% (20Hz – 50kHz)
-
- Phantom power for studio condenser mics
-
-
- Improved RF rejection perfect for broadcast applications
-
- Phantom power for condenser mics
-
- 16 high-headroom line inputs with +4 -10 operation control
-
- 16 balanced inserts perfect for integrating outboard gear
-
- 3-band EQ with sweepable midrange
-
- 18 dB oct 75Hz low-cut filter on mic input channels
-
- 4 aux sends, level, pan, solo and overload mute LEDs on each channel
-
- 4 stereo returns, 8 direct outs and 4 group bus outputs
-
- 60mm long-wearing log-taper faders
-
- Control room phones multi-input source matrix
-
- High-resolution 12-segment stereo meters
-
- Sealed rotary control resist dust and grime
-
- “Built-Like-A-Tank” rugged steel chassis with powder-coat finish
-
- High-visibility, high-contrast controls deliver convenient “at-a-glance” visual feedback
-
- Rack-mountable design with three physical configurations via Rotopod accessory (sold separately)
-
- Multi-voltage power supply for worldwide use
-
Description of 1SKB-R100:
The 1SKB-R100 is a 10U slanted top rack mixer case that features steel threaded rails, a hard lid and a removable rear door for maximum access to the rack gear, side access ports (for cable routing) on each side with a comfortable rubber over-molded handle on each side for easy carrying. The one piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard cover and rear door are Injection molded of Rubber Modified Styrene (RMS). Two TSA locking SKB patented trigger latches secure the lid while the flat hard top allows for stacking with the revised roto racks to create a modular solution for easy set-up.
Features:
- SKB 1SKB-R100 10U Top Mixer Rack Case With Steel Rails, Removable Door, and Access Port
-
- Roto-molded of LMDP Linear Medium Density Polyethylene
-
- 10U Slanted rack mount
-
- Steel threaded rails
-
- Hard lid and removable back door
-
- (2) Side access ports for cable routing
-
- Two carrying handles
-
- Two TSA locking patented trigger latches
-
- Stackable for storage and transport
-
Weights and Dimensions:
- Interior Width 19.00 in 48.26 cm
-
- Interior Depth 21.00 in 53.34 cm
-
- Exterior Length 23.25 in 59.06 cm
-
- Exterior Width 22.75 in 57.79 cm
-
- Exterior Depth 11.25 in 28.58 cm
-
- Carton Length 23.63 in 60.02 cm
-
- Carton Width 23.13 in 58.75 cm
-
- Carton Depth 11.75 in 29.85 cm
-
- Rack Space Units Top 10 10
-
- Rack Depth Rail to Rail 19.00 in 48.26 cm
-
- Shipping Weight 18.20 lb 8.26 kg
-
- Product Weight 16.40 lb 7.44 kg
-
